SUPERBOND PRIMER 3 L

Adhesion primer based on acrylic resins and quartz sand, highly alkaline resistant, ready to use, suitable for interior and exterior spaces. It is applied to smooth and low-absorbing surfaces, such as visible concrete, tiles, marble, mosaic, metal surfaces, plasterboards, cement boards, heat-insulating polystyrene plates. Creates a rough surface and ideal adhesion conditions for priming tiles, troweling painted and very smooth surfaces, plastering exposed concrete, plastering thermal insulation boards and applying pressed cement mortar.

Ready to use
Strong grip
Excellent application on cement, tiles, metal, plaster etc.

SHADES

Available in open tile. The surfaces must be clean, dry and smooth, free of dust, oils or any friable materials.

APPLICATION

It is necessary to stir the product well before using it until a homogeneous mixture is obtained. It is applied in one layer by roller or brush without thinning. If required, dilute up to 5% with water. Apply the Superbond Primer in such a way as to maintain its “embossed” texture. It should not be applied at temperatures below 5°C, above 35°C and/or relative humidity above 80%.

The product is dry to the touch in 2-3 hours. Plaster or cement mortar can be applied after 8-10 hours. These times vary depending on the layer thickness and weather conditions (relative humidity and temperature).

Tools are cleaned immediately after use with water and if necessary with soap or detergent.