DUROVIT PRIMER 15 L

Durovit is a colorless acrylic solvent substrate, which waterproofs and allows surfaces to “breathe”. It exhibits strong adhesion and penetrates porous surfaces, such as plaster, exposed concrete, bricks, plasterboards, etc., as well as surfaces painted with lime or glue. It exhibits great resistance to moisture and is ideal for surfaces to be painted with water-soluble paints (plastic, acrylic, insulating, relief, etc.).

• Waterproofs and stabilizes any surface before final painting
• Great moisture resistance allowing the surfaces to breathe

SHADES
Colorless.PROCESSING
The surfaces must be clean, dry and smooth, without dust, any mold or loose materials.
Acrylic Putty or Visto is used to putty the holes and putty any cracks. Sand the surface well and make sure it is completely dry before priming.

APPLICATION
The product is stirred well before use. It is applied in one layer with a roller, brush or airless gun. For application on walls, it is diluted 50-100% with Brush Thinner T 300 and for roofs 30%. You should not make temperatures lower than 5°C, higher than 35°C and/or relative humidity above 80%.
The product is dry to the touch in 1 hour and repeated after 4-6 hours with Vitex plastic or acrylic paints. These times vary according to weather conditions (relative temperature and temperature).
Rollers, brushes and stains on the floor are cleaned with Brush Solvent T 300 and then with soap or detergent.