ELASTOMERIC PUTTY 4 KG

General characteristics

Elastomeric water-soluble acrylic putty, suitable for the repair and waterproofing of internal and external surfaces. It contains microspheres giving it characteristics that make it ideal for repairing cracks and joints, as it shrinks little and does not crack. It has high resistance to humidity, temperature changes, alkalinity, external weather conditions and is used on surfaces such as concrete, bricks, plaster, cement, wood, plasterboards. It has strong adhesion, is simple to use and apply and rubs easily.

For indoor and outdoor use
It shrinks very little and does not crack

SHADES

Available in grey.

PROCESSING

The surfaces must be clean, dry and smooth, free of dust, oil or any friable materials.

APPLICATION

It is applied with a trowel without dilution in cracks up to 1 cm, as well as in larger ones after the use of joint filler cord. It is painted with Vitex plastic or acrylic water or solvent colors after using a suitable primer. It should not be applied at temperatures below 5°C, above 35°C and/or relative humidity above 80%.

The product is dry to the touch in 3-6 hours, depending on the dimensions of the crack-joint and is repainted after 1-2 days, depending on the dimensions of the crack-joint. These times vary according to weather conditions (relative humidity and temperature).

Tools are cleaned immediately after use with water and if necessary with soap or detergent.