FIBRANxps PI 2500x1200x82,5mm, 3m²/piece

FIBRANxps PI is a composite product consisting of FIBRANxps ETICS BT extruded polystyrene plate with grooves every 40 mm and standard 12.5mm plasterboard.

The FIBRANxps PI product is harmonized with the European Regulation 305/2011 (CPR), which replaced the European Directive 89/106/EEC and fully complies with the European Standards EN 13164 (Thermal insulating products for buildings – Industrially produced extruded polystyrene (XPS) products) and EN 13172.

It is certified by international independent Institutes and bears the CE mark.

The FIBRANxps PI extruded polystyrene sheets are produced by extrusion of polystyrene foam and have a very dense and closed microcellular structure.

The tiny thin, hard and closed polystyrene cells contain trapped inert gas and air to achieve a very high insulating capacity, but also to remain dry in wet environments (underground, inverted roof, closed swimming pools, etc.).

It is the only heat-insulating material that has extremely high mechanical strengths, waterproof but with a balanced water vapor permeability resistance.

Applications

The hard extruded polystyrene FIBRANxps PI plates are applied to all types of building constructions, even in wet environments and in cases that will carry high compressive or tensile loads.

• Thermal insulation on the outside in the Pilotis floor formwork
• Retrospective roof thermal insulation internally in areas of increased humidity