GYPSUM BOARD Plasterboard Primer 3 L

Plasterboard Primer is a water-soluble acrylic primer for internal use, with excellent filling capacity for plasterboard surfaces as well as plaster, concrete, troweled surfaces, etc. Due to the high filling capacity of the product, the absorbency is equalized between the plasterboard paper, the grouting material and the remaining surfaces to be painted. In addition, any unevenness of the plasterboard paper is fully covered. The final painting of surfaces primed with Plasterboard Primer, with any decorative water color, leads to a perfect and uniform finish, from the very first coating.

• With High filling capacity, it completely covers the unevenness of the construction materials
• Flawless finish with one coat

SHADES
White. PROCESSING
The surfaces must be clean, dry and smooth, free of dust, oil or any friable materials.
Acrylic Putty or Visto is used to putty the holes and putty any cracks. Sand the surface well and make sure it is completely dry before priming.

APPLICATION
The product is stirred well before use. It is applied in one or two layers by roller, brush diluted 5-10% with water or airless gun diluted 10-15% with water. It should not be applied at temperatures below 5°C, above 35°C and/or relative humidity above 80%.
The product is dry to the touch in 30-60 minutes and repainted after 6-8 hours with Vitex water-soluble plastic paints. These times vary according to weather conditions (relative humidity and temperature).
Tools are cleaned immediately after use with water and if necessary with soap or detergent.