VISTO 20 KG Package 54 Pieces

Certified Product
Verified Main Product
Qty Item Price
- -
Please login to your free account in order to gain access to product prices and request offers directly from the sellers.



White water-soluble acrylic putty for interior and exterior surfaces. It has a high resistance to moisture, temperature changes, alkalinity and is used for plastering walls, exposed concrete, ceilings, aerated concrete, gypsum boards and cement boards. It is simple to use and apply, dries quickly without cracking, sands easily and gives a smooth finish ready for painting.

• Indoor and outdoor use
• Excellent adhesion and great coverage

White. The surfaces must be clean, dry and smooth, without dust, oils or any loose materials. Absorbent surfaces such as aerated concrete should be wetted before application or primed with Vitex 100% Acrylic Primer.

In a clean bucket, mix the amount you need with a ratio of 2.5 parts powder to 1 part water, stirring constantly until a homogeneous mass without lumps is created. Leave the mixture for 5-10 minutes and mix again. The prepared mixture is workable for about 2-3 hours. It is applied in two successive layers that are separated from each other by approximately 4-5 hours and in a total thickness of layers that does not exceed 4mm, with a spatula, trowel or airless gun. It is sanded after about 7-8 hours with sandpaper. The surface must be thoroughly dried, cleaned and primed with a suitable Vitex primer before painting. It should not be applied at temperatures below 5°C, above 35°C and/or relative humidity above 80%.
These times vary according to weather conditions (relative humidity and temperature).
Tools are cleaned immediately after use with water and if necessary with soap or detergent.